Saturday, June 1, 2013
Painting bumper with his own hands
Bumper is the most prominent place car and its appearance has played an important role in the overall appearance of the car. All motorists who are faced with Car servicing, understand that pleasure is very expensive. And the price does not necessarily mean good quality. Especially now in the country, a time of crisis. It is worth noting that the painting machine, the work is very time-consuming, and in some moments requires almost the jewelry work. If you decide to paint their own bumper of his car, the first thing you need to find the right paint, which should match the old paint. Staining should be carried out in a closed room, where there is no maximum moisture and dust. This article will help you make a painting of the bumper, unless of course you follow all the recommendations and try to gently work. In the beginning, remove the bumper from the car and put it on a convenient work surface. Now should be carefully repaired minor scratches, chips and a little polish. Then a very thin layer to reveal the bumper primed to do so should be doubled. Remember that the warm surface of the paint falls much better. But this does not mean that you should put the bumper in the sun, it is better to put it near a window on the sunny side. In this case, further work will be guaranteed an excellent result. Before painting the whole painted surface is necessary to overwrite the 600 th sandpaper. When using nazhdachku perform better movement back and forth and do circular motions. If you do paint the bumper because of the rust, then you need to treat the surface before the metal itself. This should be done with sandpaper. Surface after treatment with sandpaper must be free of grease, in order to paint when painting lay flat. Now let's paint. Paint a good stir and carefully superimpose the first layer. After that, wait until it dries out, and repeat the painting twice. Again, you should wait until the bumper completely dry. Further, to reveal the brightness of the bumper paint. If you do not feel up to the challenge, then you need to be trained. Take some old scrap metal and try to paint him, if you build it, then you can safely get to work. Otherwise, do not take risks and to save, better to turn to the master, because the correction of bad painting, can cost you a large sum of money. If you want does not fully painted bumper, but only parts, then do grout to partly also done the coloring of the first layer of paint. But the last layer of paint must be imposed entirely on the entire bumper. This is done in order to not get the difference in color, because it is very difficult to find just such a tone, which was initially. To good effect bumper should be polished. Well, that's all the recommendations and sustained action to paint the bumper, hopefully they will help you.
